Food Grade Steam Boiler Chemical

ChemWorld 3061-F is an All-in-One All-Polymer internal treatment product. ChemWorld 3061-F includes polymer for deposit control, alkalinity builder for maintaining the boiler alkalinity, and sulfite for removing oxygen from the boiler water.

ChemWorld 3061-F does not include neutralizing amine which, if required, should be fed in combination with this product to maintain condensate quality. ChemWorld 3061-F is typically used in systems with make-up water that has not been softened. This product can be used in facilities where steam can contact food or edible products and is USDA registered for use in meat and poultry plants.

Features and Benefits

• Improves boiler reliability and cleanliness
• Single drum product for ease of use
• Utilizes copolymer for excellent control of hardness and iron deposition
• The Polymer is stable over a wide range of temperatures and pressures
• Approved for use in FDA and USDA applications

Product Feed and Control
ChemWorld 3061-F is fed continuously to the system being treated. The product may either be fed neat directly from the shipping container or mixed in a chemical feed tank using good quality condensate, softened water, or feedwater. Tanks, pumps, piping and valves should be made of stainless steel, polyethylene, or PVC. The sulfite level in

ChemWorld 3061-F should be adequate for systems with feedwater temperatures less than 160F, but should be monitored to maintain the recommended residual sulfite concentration. Boiler water "P" alkalinity should also be controlled to the range specified by the technical specialist servicing the facility.

Physical Properties
Physical properties of ChemWorld 3061-F are shown on the Material Safety Data Sheet (MSDS), a copy of which is available upon request.

Storage and Handling
Keep in a tightly closed container. Store indoors. Recommended storage temperature is 50 F - 105 F (10 C - 40 C). Do not reuse container. Dispose of empty containers in compliance with federal, state/provincial and local laws and regulations.

For new steam boiler startups, consider purchasing our Steam Boiler Startup Kit.How much of this chemical do I need to add to the boiler? Suggested feedrate is 1500 to 4500 ppm as product which should generate 10 to 30 ppm polymer in the boiler.