Description
Neptune JGR
Neptune JGR Series Mixers. Features include:- No clutches to slip, wear or replace.
- 316SS propellers and shafts are standard.
- Optional coatings such as rubber, PVC or Teflon also available.
- Square pitch 1.0 ratio marine propellers are used exclusively. Flow coefficients and power consumption characteristics equal those of the best hydrofoil impeller designs.
- Vibration-absorbing pad standard.
- Motors are available in TEFC or explosion-proof enclosures (1750 rpm, 56C frame). Air motors also available.
- Gears run in grease lubrication. Cannot leak oil.
- All JGR mixer shaft bearings are permanently lubricated.
- Variable speed drives also available.
- Cast aluminum housing.
- Angle-riser mount provides a fixed 10 degree angle of entry.
|
Model |
Motor |
Shaft Dimater |
Shaft Length |
Single Propeller Diameter |
Dual Propeller Diameter |
Shipping Weight (lbs) |
|
|---|---|---|---|---|---|---|---|
| JGR-2.0 | 1/3HP-1-115/230-TEFC* | 3/4" | 48" | 10" | 8" |
|
65 |
| JGR-2.1 | 1/3HP-3-230/460-TEFC* | 3/4" |
48" |
10" | 8" |
|
65 |
| JGR-2.2 | 1/3HP-1-115/230-EP | 3/4" |
48" |
10" | 8" |
|
75 |
| JGR-2.3 | 1/3HP-3-230/460-EP | 3/4" |
48" |
10" | 8" |
|
75 |
| JGR-3.0 | 1/2HP-1-115/230-TEFC* | 3/4" |
48" |
12" | 10" |
|
70 |
| JGR-3.1 | 1/2HP-3-230/460-TEFC* | 3/4" |
48" |
12" | 10" |
|
70 |
| JGR-3.2 | 1/2HP-1-115/230-EP | 3/4" | 48" | 12" | 10" |
|
90 |
| JGR-3.3 | 1/2HP-3-230/460-EP | 3/4" | 48" | 12" | 10" |
|
90 |
| JGR-3.4 |
1/3 TO 1/2HP AIR MOTOR** Air Requirements: 12-20CFM at 40-80PSI |
3/4" | 48" | 12" | 10" |
|
65 |
| JGR-4.0 | 3/4HP-1-115/230-TEFC* | 3/4" | 60" | 13" |
11" |
|
80 |
| JGR-4.1 | 3/4HP-3-230/460-TEFC* |
3/4" |
60" | 13" | 11" |
|
80 |
| JGR-4.2 | 3/4HP-1-115/230-EP |
3/4" |
60" |
13" | 11" |
|
90 |
| JGR-4.3 | 3/4HP-3-230/460-EP |
3/4" |
60" |
13" | 11" |
|
90 |
| JGR-4.4 |
3/4HP AIR MOTOR** Air Requirements: 30CFM at 60PSI |
3/4" |
60" |
13" | 11" |
|
70 |
| JGR-5.1 | 1HP-3-230/460-TEFC* |
1" |
60" |
14" |
12" |
|
90 |
| JGR-5.3 | 1HP-3-230/460-EP |
1" |
60" |
14" | 12" |
|
100 |
| JGR-5.4 |
1HP AIR MOTOR** Air Requirements: 30CFM at 60PSI |
1" |
60" |
14" |
12" |
|
70 |
| JGR-6.1 | 1-1/2 HP-3-230/460-TEFC* | 1" | 60" | 15" | 13" |
|
90 |
| JGR-6.3 | 1-1/2 HP-3-230/460-EP |
1" |
60" | 15" | 13" |
|
100 |
| JGR-6.4 | 1-1/2 HP AIR MOTOR |
1" |
60" | 15" | 13" |
|
75 |
| JGR-7.1 | 2HP-3-230/460-TEFC* |
1-1/4" |
60" | 16" | 14" |
|
95 |
| JGR-7.3 | 2HP-3-230/460-EP |
1-1/4" |
60" | 16" | 14" |
|
105 |
| JGR-7.4 |
2HP AIR MOTOR** Air Requirements: 65CFM at 70PSI |
1-1/4" |
60" |
16" | 14" |
|
80 |
| JGR-8.1 | 3HP-3-230/460-TEFC |
1-1/4" |
72" | 16" | 15" |
|
115 |
|
JGR-8.4 |
2HP AIR MOTOR** Air Requirements: 125CFM at 90PSI |
1-1/4" | 72" | 16" | 15" |
|
80 |
| JGR-9.1 | 5HP-3-230/460-TEFC | 1-1/4" | 72" | 16" | 15" |
|
125 |
* Mill and Chemical Duty Motors available.
** Requires Air Set.