Stenner Pump 45MHP22

This is one of the most popular Stenner Pump model, Stenner Pump 45MHP22. The product is stocked in Salt Lake City, Utah; Detroit, Michigan; & Atlanta, Georgia.

1 to 2-day shipping to 95% of the USA. ChemWorld also sells just the Stenner 45MHP22 pump with no accessories as in the photo.

What is the rating of Stenner Model 45MHP22?
The break down of this Stenner Model 45MHP22 is 45MJH7A1S.

1. The adjustable head rated is at 100 psi.
2. Rated at 1.1 to 22.0 GDP.
3. Voltage/Hertz is 110/120 Volt.
4. 1/4 inch suction and discharge tubing size.
5. Santoprene tube material. Check out the material compatibility chart, if you are concerned about chemical compatibility.

There are other options for Stenner 45MHP10. If you need a different voltage, tube size, or material discharge size please refer to our main Stenner 45M page.

Pump Kit includes (everything in the picture):

• THREE 1/4" chemical injection check valve.
• ONE Chemical Injection Quill 100 psi (6.9 bar).
• ONE 1/4" weighted suction line strainer.
• ONE 1/4" x 20 foot white (clear) roll suction/discharge tubing.
• ONE additional
• ONE additional Stenner Number 7 pump tube.
• TWO additional latches.
• ONE mounting bracket.
• Optional Stenner Pump rain roof or rain cover & rain roof.

ChemWorld also sells just the replacement Stenner Pump 45MHP22 without all the items in the kit.

Need other options for your Stenner Pump. Check out our main Stenner Pump product page.

Need to convert to a 3/8" discharge tube?
Convert your Stenner pump to a 3/8" discharge tube size by ordering the Stenner 1/4" to 3/8" tube adapters. You will also require a 3/8" chemical injection quill if you are injecting the product into a pipe.